Large Family Swimming Pool Outdoor Summer Inflatable Kids Paddling Pools⭐⭐⭐⭐⭐

Description

Bullet Points:
1. High Quality Material: The high-strength hot carbon tough PVC layered independent airbag adopts
reinforced thermal fusion technology, which is firm and not easy to break. If a single layer leaks, it will
not affect the normal use of the surrounding baby.
2. Upgraded air Leak-proof Valve: Each layer of airbag has an upgraded version of leak-proof valve, which
is highly sealed to prevent air leakage.
3. Comfortable to Use: The wear-resistant thermal insulation foam bottom is comfortable for pedaling
without bump.
4. Baby Falling Prevention: The thick bottomed inflatable bladder effectively blocks the cold on the ground,
avoiding the rapid drop in water temperature, and prevents the baby from falling and stung while swimming
or playing in the pool.
5. Product Sizes: 110 * 88 * 33cm; 128 * 85 * 45cm; 155 * 108 * 46cm; 181 * 141 * 46cm.
Specifications:
Name: Swimming Pool
Sizes(about):
110 * 88 * 33cm/43.31*34.65*12.99in
128 * 85 * 45cm/50.39*33.46*17.72in
155 * 108 * 46cm/61.02*42.52*18.11in
181 * 141 * 46cm/71.26*51.51*18.11in110*88*33cm
128*85*45cm
155*108*46cm
181*141*46cm
200*150*50cm
262*175*50cm
305*183*50cm
Material: High-strength hot carbon tough PVC layered independent airbag
Instructions for use:
After unpacking, unfold it completely and lay it flat on a clean and smooth ground.
From the bottom to the top, inflate layer by layer, inflate to 90% -95% saturation, and then press down
to parallel to the body of the pool. After inflating for 8 hours, there is no air leakage, and then add cold water.
Add hot water (after mixing with water). The temperature must not be higher than 50% C).
After use, open the bottom drain plug. After the water is drained, place the swimming pool in the shade and dry it.
Then open the vent valve, completely deflate and put it in a PE bag and place it in the shade.
Packing List:
Swimming Pool * 1